The working temperature is a key factor for aluminium dross processing

The working temperature is a key factor for aluminium dross processing
The working temperature is a key factor for aluminium dross processing
Aluminium dross processing machine is an effective equipment for extracting metal aluminum from aluminium dross, as long as we control its temperature, we can increase its output.
Aluminium dross processing machine is a kind of aluminum dross recycling equipment, which is mainly used to process the high-temperature aluminium dross generated from the furnace.
The purpose is to recover the metal aluminium in the aluminium dross and slag, so as to improve the utilization rate of metal aluminum and reduce the production cost.
Aluminium dross processing machine does not need any fuel when it works, which uses the residual heat from aluminium dross.
The processing cost is low, the operation is simple and the maintenance is convenient, it is an ideal machine for aluminium dross recovery, and the recovery rate of metal aluminum is high compared with the traditional way.
High-temperature aluminium dross contains liquid metal aluminum and solid alumina impurities.
The high-temperature aluminium dross is charged into the pot of aluminium dross machine, and the aluminium dross is stirred by the stirrer.
Under the action of stirring, the liquid high-temperature aluminium liquid is continuously moved and sinks into the bottom of the pot, and is separated from the aluminium dross.
At the same time, in the pot of dross machine, part of the fine metal aluminium is oxidized and burned, so that the temperature of the aluminium dross continues to rise, and the surface tension of the solid and liquid phases is enhanced to facilitate the separation of liquid aluminium beads.
The working temperature of the aluminum dross in aluminium dross machine must be well controlled, preferably around 800 degrees.
If the temperature is too high, the stirrer can be damaged and it is easy to melt.
If the temperature is too low, aluminium metal cannot be separated from aluminium dross, so the dross temperature is the key point.
In addition, the dross must be stirred evenly and fully during the stirring process, after it is evenly and fully stirred, the recovery rate will be better, and the aluminium liquid will be sent to the furnace for recovery or cast into the ingot directly.
It is the key to control the working temperature of the aluminium dross processing machine, and controlling the temperature is an important factor for using the equipment well.
If you encounter problems in the aluminium dross processing,  please feel free to contact our technicians, we will guide you to increase aluminium recovery rate with our many years of experience and technology and solution.
Contact Us Now For Technical Support

More Information I Want To Know

February 22, 2023

Read more

Local News